Rockford Fosgate P600X4: Punch 600 W 4-Channel Amplifier
- In stock, ready to ship
About the Rockford Fosgate P600X4: Punch 600 W 4-Channel Amplifier
The Punch P600X4 is a 4-Channel Amplifier producing 150 W into all four Channels at 2 ohms. The P600X4 is perfect for a 4 way full range system or a 3 way system having a front stage through subwoofers on the rear Channels.
The Punch P600X4 multi-Channel Amplifier is versatile to power any audio system configuration. In addition to 4-Channel stereo mode, you can bridge both Channels to create a high power 2-Channel amp, or run stereo speakers on the front through subwoofers on the rear in 3-Channel mode. The variable HP / LP crossover and built in Punch EQ allows for precise tuning of bass frequencies and the Pass thru RCA jacks provide flexibility as your system grows and keeping Y adapters to a minimum.
Specifications:
- 4-Channel Car Amplifier
- 75 W RMS x 4 at 4 ohms (150 W RMS x 4 at 2 ohms)
- 300 W RMS x 2 bridged at 4 ohms (4 ohms stable in bridged mode)
- CEA-2006 compliant
Features:
- Variable high and low pass filter (50-250 hz, 12 dB / octave)
- Variable PEQ2 bass / treble boost (0-18 dB at 45 hz and 0-14 dB at 12.5 K hz)
- C.L.E.A.N. gain setup system includes test tone CD
- Test tones also available as MP3 download from Amazon on demand, Rhapsody, Google play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup)
- Class AB Amplifier design
- Frequency response: 20-20 K hz
- Dynamic thermal management and MEHSA MOSFET cooling systems
- MOSFET power and output stages
- Preamp inputs and outputs
- Speaker level inputs (speaker wire to RCA adapter required)
- Signal sensing turn on with speaker level inputs eliminate need for remote turn on lead
More info:
- Optional PLC2 wired remote level control including clip light
- 4 gauge power and ground leads and an 100 amp fuse recommended — wiring and hardware not including Amplifier
- No onboard fuses — when installing multiple amps in a system, an additional 100 amp in line fuse between the distribution block and the Amplifier is recommended
- Dimensions (W x H x D): 13 - 3 / 8" x 2 - 7 / 16" x 8 - 13 / 16"
What's in the box:
- 4-Channel Amplifier
- Four 1 - 1 / 2" self tapping screws
- 2.5 mm Allen wrench
- Quick setup instructions
- Certificate of performance
- Setup / manual disc
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.