Kicker 48CWRT102: 10" CompRT-Series 400 W RMS Dual 2-Ohms Subwoofer
- In stock, ready to ship
Big sound from a small Subwoofer:
If you're looking for bass for a tight space, Kicker designed their CompRT-Series Subwoofers through compact cars, pickup trucks, and ATVs in mind. The low profile 48CWRT102 10" Subwoofer performs just like a full size Subwoofer, but without killing all your cargo space. This high performance CompRT-Series Subwoofer stands less than 3.5" tall, so your installation options are wide open. Kicker has redesigned the forced air cooling system, so this Subwoofer will run cooler when you drive it hard (and you know you will).
Made to bring the boom:
The 48CWRT102 comes equipped through a rigid injection molded polypropylene cone that won't flex and cause distortion while you're cranking the bass. Its rubber surround will last through years of heavy use, combining through a special design back and top plate to give you more excursion (which equals more bass) than other skinny Subwoofers.
Made to fit many systems:
This Subwoofer handles up to 400 W RMS so make sure you've got a solid amp to power it. You can wire the Dual voice coils for either 1 or 4-Ohms total impedance, giving you more wiring options when setting up your system. This versatile Subwoofer sounds great in sealed or ported enclosures.
Product highlights:
- 10" shallow-mount Subwoofer including Dual 2-Ohms voice coils
- Injection molded polypropylene cone
- Rubber surround
- Power handling: 400 W RMS (800 W peak)
- Frequency response: 25 - 500 hz
- Sensitivity: 84.8 dB
- Top-mount depth: 3.4"
- Sealed box volume: 0.4 - 1.3 cubic FT
- Ported box volume: 1.3 - 1.8 cubic FT
- Grille not included
- Warranty: 1 year
Features & specs:
| Size | 10" | |
| Impedance | 1 Ohm | |
| Cone material | polypropylene | |
| Surround material | santoprene rubber | |
| Ideal sealed box volume (cubic FT) | N / A | |
| Ideal ported box volume (cubic FT) | N / A | |
| Port diameter (") | N / A | |
| Port length (") | N / A | |
| Free air | no | |
| Dual Voice Coil | yes | |
| Sensitivity | 84.8 dB at 1 W |
|
| Frequency Response | 25 - 500 hz | |
| Maximum RMS power handling (W) | 400 | |
| Peak power handling (W) | 800 | |
| Top mount depth (") | 3.5 | |
| Bottom mount depth (") | 4 1/4 | |
| Cutout diameter or length (") | 9 1/8 | |
| Vas (L) | N / A | |
| Fs (hz) | N / A | |
| Qts | N / A | |
| Xmax (mm) | N / A | |
| Parts warranty | 1 year | |
| Labor warranty | 1 year | |
Product research:
Features:
Dual voice coils: this woofer features Dual 2 Ω voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 1 Ω load. When the voice coils are wired in series, the woofer presents a 4 Ω load.
Shallow mount: Kicker's CompRT-Series is designed to minimize depth, giving you Subwoofer options where standard enclosures don't fit.
All weather: Although not marine certified, Kicker describes the CompRT-Series as weatherproof.
Cooling: Kicker engineers developed a forced air cooling system, using the motor structure to pull air across the voice coils, helping the Subwoofer run up to 20% cooler than the previous model.
Sealed enclosures: sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Kicker recommends sealed enclosures from 0.4 - 1.3 cubic FT.
Vented enclosures: vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use through smaller amplifiers, giving you more bass output from a given amount of power. Kicker recommends the following ported enclosures:
- Minimum enclosure volume: 1.3 cubic FT and a 10 x 2 x 20" slot port
- Maximum enclosure volume: 1.8 cubic FT and a 10 x 2.5 x 20" slot port
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.