JL Audio JLLOC22: 2-Channel Fully Active Speaker Level - Line Output Converter

The JLLOC22 is an active 2-Channel processor engineered for applications requiring the attenuation of factory Audio signals for use through aftermarket amplifiers and signal processors.

The JLLOC22 utilizes a fully regulated, switching MOSFET power supply and an all analog circuit design to deliver flat frequency response, at any signal level (3 hz - 32 kHz, + 0, - 1 dB), without altering bass response at high levels, like many passive Line Output Converters do.

Engineered to combat induced cable noise, the JLLOC-22 features a differential balanced input architecture making it compatible alongside virtually any analog Audio signal.  Capable of accepting up to 40 V RMS per-Channel (equivalent to 400 W @ 4 ohms), the JLLOC22 easily handles the most powerful factory amplifier Outputs.  An onboard dual range input load switch allows compatibility alongside most factory amplifiers that employ impedance sensing to mute-Channels.

Ideal for full range or low frequency applications, the JLLOC22 is equipped through a pair of analog RCA type, Line level Output jacks (up to 8 V RMS) to feed Audio signals to your aftermarket system.  Analog Outputs are compatible alongside most types of aftermarket signal processors or amplifiers.  Setting Output levels is super simple and easy, thanks to a specially calibrated, onboard clipping indicator that works through test tones or music. The JLLOC22 offers 2 automatic turn on methods (DC offset or signal sensing) and provides a positive 12 V turn on Output to activate aftermarket amplifiers or other downstream electronics.

Features:

• Fully Active, all analog circuit design, handles powerful factory amplifier Outputs, up to 40 V per-Channel
• Differential balanced input architecture offers noise rejection and compatibility alongside most analog Outputs from OEM source units and amplifiers
• Dual range input load switch (20 kΩ / normal, 60 Ω / low Z, thermally protected) for maximum compatibility alongside OEM amplifiers
• 1 stereo pair of crystal clear, Line level RCA output jacks (up to 8 V RMS)
• Automatic turn on via DC offset or signal sensing
• A dedicated 12 V remote turn on Output (maximum 100 mA) to activate aftermarket signal processors or amplifiers
• Onboard LED clipping indicator makes Output level setting quick & easy
• Ultra compact chassis design fits into just about any installation location!