JL Audio 8W3V3-4: 8" 250 W RMS 4-Ohms W3V3-Series SVC Subwoofer
- In stock, ready to ship
- Backordered, shipping soon

About the JL Audio 8W3V3-4: 8" 250 W RMS 4-Ohms W3V3-Series SVC Subwoofer
If you need an 8" Subwoofer that can create outstanding bass in extremely small enclosures, the 8W3V3-4 will do the job and surprise you through its power and accuracy. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.4" (10 mm) of controlled, 1 way, linear excursion.
The 8W3V3-4 is best used through amplifier power in the 75 - 250 W range and is optimized to operate in a tiny 0.3 cubic FT (8.5 L) sealed enclosure, or a 0.4 cubic FT (9.9 L) ported enclosure.
Enclosure notes:
- The enclosure recommendations listed above are external dimensions which assume the use of 0.8" (19 mm) thick material. If you are using 0.6" (16 mm) thick material, subtract 0.3" (6.5 mm) from each dimension. Do not use any material through a thickness of less than 0.6" (16 mm) as this may compromise the rigidity of the enclosure
- All enclosure volumes listed above are net internal volumes! Driver, port and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account
- When using multiple Subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or technical support
- We recommend the use of this speaker in a bi amplified system using high quality satellite speakers and an amplifier. We do not recommend the use of this Subwoofer through a passive crossover (coil), as this type of device will adversely affect performance
- All specifications are subject to change without notice
Safety notice:
- Prolonged exposure to sound pressure levels in excess of 100 dB can cause permanent hearing loss. This high performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity
- When installing a Subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle through large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van
Features:
- 8" 4-Ohms Subwoofer
- Mineral filled polypropylene cone and nitrile butylene rubber surround
- Power range: 50 - 250 W RMS
- Peak power handling: 500 W
- Frequency response: 28 - 250 hz
- Sensitivity: 83.2 dB
- Top mount depth: 4 - 9 / 16"
- Sealed box volume: 0.3 cubic FT
- Ported box volume: 0.4 cubic FT
- Grille not included
Specifications:
- Continuous power handling (RMS): 250 W
- Recommended amplifier power (RMS): 75 - 250 W
- Nominal diameter: 8" / 200 mm
- Overall diameter: 8.5" / 217 mm
- Mounting hole diameter: 7.1" / 180 mm
- Bolt hole circle diameter: 7.9" / 199 mm
- Motor outer diameter: 4.8" / 121 mm
- Mounting depth: 4.6" / 118 mm
- Driver displacement: 0.0 cubic FT / 0.9 L
- Net weight: 8.2 lbs / 3.7 kg
Parameters:
- Free air resonance (FS): 35.1 hz
- Electrical "Q" (QES): 0.5
- Mechanical "Q" (QMS): 7.1
- Total speaker "Q" (QTS): 0.5
- Equivalent compliance (VAS): 0.5 cubic FT / 15.3 L
- 1 way linear excursion (XMAX): 0.4" / 10 mm
- Reference efficiency (NO): 0.1%
- Efficiency (1 W / 1 m): 83.2 dB SPL
- Effective piston area (SD): 32" ² / 0.0 m ²
- DC Resistance (Re): 3.77 Ω
- XMAX specifications are derived via 1 way voice coil overhang method and no correction factors applied.
- Efficiency (1 W / 1 m) is not an accurate indicator of a Subwoofer's output capability and should not be used as a comparison to other Subwoofers to determine which one is "louder"
Sealed enclosure specifications:
- Wall thickness: 0.8" / 19 mm
- Front baffle thickness: 0.8" / 19 mm
- Volume (net INT): 0.3 cubic FT / 8.5 L
- External width (W): 10" / 254 mm
- External height (H): 10" / 254 mm
- External depth (D): 9.5" / 241 mm
- F3: 54 hz
- FC: 58.8 hz
- QTC: 0.8
Ported enclosure specifications:
- Wall thickness: 0.8" / 19 mm
- Front baffle thickness: 0.8" / 19 mm
- Volume (net INT): 0.4 cubic FT / 9.9 L
- External width (W): 13" / 330 mm
- External height (H): 10" / 254 mm
- External depth (D): 9.3" / 203 mm
- Internal port diameter (ID): 2" / 51 mm
- Port length (L): 18" / 457 mm (round port requires a 90 º elbow to fit in the specified enclosure)
- Tuning frequency (FB): 35 hz
- F3: 41 hz
What's in the box:
- One 8" Subwoofer
- Black plastic trim ring
- Owner's manual
Orders are typically processed and Shipped within 1 - 2 business days. Delivery usually takes 7 - 15 business days via Canada post, FedEx, or UPS.