Quest Commercial RM-06: 6-Zones Gooseneck Paging Microphone

About the Quest Commercial RM-06: 6-Zones Gooseneck Paging Microphone

The Quest Commercial RM-06 is an optional 6-Zones Paging Microphone through built in chime for use through the PR-130 and 240A / BT.

Front panel features:

• Indicators: power (blue), signal (green), clip and busy (red).
• Microphone input: XLR input jack to connect a condenser Microphone.
• All, select and release and press and hold for locking all-Zones.
• Z 1 - 6, individual-Zone selection, select and release each-Zone 1 – 6.  Press and hold for locking the selected-Zone.
• Chime, turn on and off the preannouncement chime.
• Talk, press and hold to start broadcasting after selecting the-Zones.  Release the button to end broadcasting.

Rear panel features:

• Link, terminals to connect to the PR-series mixer / amplifier through UTP cat 5 / 6. We recommend a total distance of up to 200 m between the Microphone and the mixer / amplifier.  Up to 4 RM6 can be connected through the link port
• Chime and Microphone volume,  adjust preannouncement and level
  

Specifications:

• Audio output: 0 dB (balanced)
• Audio input: -36 ± 3 dB (balanced) 
• Frequency response: approximately 80 hz - 15 kHz (- 1 dB)
• S / N ratio: better than 90 dB
• Total harmonic distortion (THD): less than 0.5 %
• Serial interface: RS485 maximum 200 m (UTP cat 5 / 6) 
• Operating temperature: approximately 0 - + 40 ° C
• Carton dimensions (W x H x D): 7.9 x 2.4 x 4.7" (200 x 60 x 120 mm)
• Weight (net): 1.1 lbs (0.5 kg)