Rockford Fosgate P1000X5: Punch 1000 W Class-BD 5-Channel Amplifier
- In stock, ready to ship
About the Rockford Fosgate P1000X5: Punch 1000 W Class-BD 5-Channel Amplifier
The Punch P1000X5 is an ultra efficient 5-Channel Amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front / rear system and a dedicated subwoofer.
The P1000X5 1000 W full-range 5-Channel is the one and only Amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofers off the 5th Channel! Known worldwide for brute power, this Amplifier offers a higher level of efficiency along through a tri stage protection that covers thermal, over current and short circuits.
Specifications:
- 5-Channel Amplifier
- 75 W RMS x 4 + 150 W RMS x 1 at 4 ohms
- 125 W RMS x 4 + 300 W RMS x 1 at 2 ohms
- 250 W RMS x 2 bridged at 4 ohms + 500 W RMS at 1 ohm
- CEA-2006 compliant
Features:
- Variable high and low pass filters (50-250 hz, 12 dB / octave)
- Variable PEQ2 bass / treble boost (0-18 dB at 45 hz and 0-14 dB at 12.5 K hz)
- Switchable subsonic filter (28 hz, 12 dB / octave) on subwoofer Channel
- C.L.E.A.N. gain setup system includes test tone CD
- Test tones also available as MP3 download from Amazon on demand, Rhapsody, Google play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup)
- Class-BD Amplifier design
- Frequency response: 20-20 K hz
- Dynamic thermal management and MEHSA MOSFET cooling systems
- MOSFET power and output stages
- Preamp and speaker level inputs (speaker level inputs require a speaker wire to RCA adapter)
- Signal sensing turn on through speaker level inputs eliminate need for remote turn on lead
More info:
- Optional PLC2 wired remote level control including clip light
- 4 gauge power and ground leads and an 150 amp fuse recommended — wiring and hardware not including Amplifier
- No onboard fuses — when installing multiple amps in a system, an additional 150 amp in line fuse between the distribution block and the Amplifier is recommended
- Dimensions (W x H x D): 15 - 1 / 8" x 2 - 7 / 16" x 8 - 13 / 16"
What's in the box:
- 5-Channel Amplifier
- Four 1 - 1 / 2" self tapping screws
- 2.5 mm Allen wrench
- Quick setup instructions
- Certificate of performance
- Setup / manual disc
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.